Vista ViP2 VK2-1080VFD, Installation And User Manual

Page: 14 / 66

14
3. Operation
Before powering the camera, installation must be complete. The camera completes a configuration
sequence taking approximately 40 seconds from powering up. Once completed the LED will be a
constant Green.
The VK2-1080VFD can be used with Windows operating system and browsers. The recommended
browsers are Internet Explorer, Safari, Firefox, Opera and Google Chrome.
NOTES
- To view streaming video in Microsoft Internet Explorer, set your browser to allow ActiveX controls.
- If the DHCP is enabled but the camera is not connected to a DHCP server, the camera will be set to
a default IP address of192.168.30.220 and will try to obtain an IP address from a DHCP server every
two seconds.
- Network and processor bandwidth limitations might cause the video stream to pause or appear
pixelated when an increased number of Web-interface users connect to the camera. Decrease the
images per second, resolution, compression, or bit rate settings of the Web-interface video streams to
compensate for network or processor limitations.
3.1 Minimum conditions for using web browser
The minimum system requirements to use a Web browser with this IP camera are as follows:
- CPU: Pentium® 4 microprocessor, 2.0GHz
- Operational System: Windows XP® or Windows Vista® or Windows7®
- System Memory: RAM 512 Mbyte
- Ethernet: 100 Mbit
- Video Resolution: 1024(Horizontal) x 768(Vertical) pixels or higher
- Internet Explorer® 7 or later
- ActiveX® 1.0.0.13 or later