english
E
EN-60
EN-61
english
E
Technical information
Technical information
5. Technical inspection / calibration check
Upon request, responsible authorities or authorised main-
tenance services receive a “Test instruction for metrological
inspection” from the manufacturer.
Basically, a metrological inspection is recommended at intervals
of 2 years. However, professional users in Germany are obligat-
ed to comply with the aforementioned according to “Regulation
for Operators of Medical Devices”.
This can be implemented either by UEBE Medical GmbH, an
authority responsible for metrology, or authorised maintenance
services. For this, please observe your national provisions.
Important: No modifications, e.g. opening the unit (except to
replace the batteries) may be made to this unit without the man-
ufacturer’s prior permission.
6. Explanation of symbols
This product complies with the Council Directive 93/42/
EC from 5 September 2007 regarding medical devices
and bears the mark CE 0123 (TÜV SÜD Product Service
GmbH).
Degree of protection against electric shock: TYPE BF
0123
Please observe instructions for use
Storage and transportation conditions
Ambient temperature -5 to +50 °C
Manufacturer
Serial number
Reference number = item number
Equipment class II (double-insulated)
For indoor use only
Internal polarity positive
Mains adapter specifications
If using the optionally available mains adapter:
IP20
Protected against solid foreign particles with a diame-
ter of more than 12.5 mm, no protection against water.
Batteries and technical appliances must not be dis-
posed of with domestic waste, but should be handed in
at the appropriate collection and disposal points.
7. Disposal
Relative humidity up to 85 %, non-condensing
Keep dry
85%
0%
