o
Attach the quick release plate to the bottom of the Audio Camera, ensuring the the quick
release plate is squarely aligned with the base of the Camera
o
Insert the quick release plate into the swivel head
o
While supporting the Audio Camera, release tension on the swivel head ball joint, position the
Camera straight up and down and retighten the mount
o
Place Audio Camera mount against a secure surface in the desired structure or vehicle. In
automobiles, this is typically the passenger seat or on top of the center console
o
Use the four straps at the corners to secure the mount in place by stretching them underneath
the car seat (or other location) and then tighten them up by ratcheting the orange levers until the
mount feels secure
o
Readjust the Audio Camera position to compensate for any tilt caused by the mounting position
3.2. Cable connections
Boot the computer. [Username: VisiSonics Password: changeme]
Plug in computer power supply for optimum performance
Plug the USB 3.0 -A jack into the laptop
Plug the USB 3.0 -B jack into the appropriate port in the Audio Camera handle
Plug the Audio Camera labeled power supply into the Audio Camera handle
Warning
: Switching the Audio Camera power supply and computer power supply can damage the devices.
The Audio Camera power supply is 12V, 3-4A.
