1. List of Components Supplied
❖
VisiSonics 5/64 Audio/Visual Camera
❖
Acquisition Computer with a Powerful GPU
❖
Table Top Tripod
❖
USB 3.0-B to USB 3.0-A Cable (black)
❖
Laptop Power Supply (large)
❖
Audio/Visual Camera Power Supply (small)
❖
Pelican Carrying Case
2. Notices and Warning
This device and software are supplied under license given at the end of this document. Use of the device is
subject to agreement with the terms of this license. The VisiSonics 5/64 Audio/Visual camera is a delicate
electronic device. It should not be shaken, dropped, or subject to stress, jerky motion, or extreme
temperatures. The device storage and operating temperature is from 5 to 40 degrees Celsius. Always use the
included Pelican case to store and transport the Audio Camera. Failure to handle with care or to properly store
the device voids all warranties. The device contains no user serviceable components. Opening the device
immediately voids all warranties. Should the device fail to function under normal operational conditions,
VisiSonics will cover repair at its cost (less shipping) during the first year after purchase, subject to the
condition that the device has been properly maintained. Repairs will be covered in subsequent years only if an
appropriate service agreement is in place. Otherwise, repairs are billable for both time and materials; contact
VisiSonics for further details.
Warranties cover the physical camera only; they do not extend to the laptop, tripod, and cables. Some of these
items are covered by their respective manufacturers’ warranties.
3. Camera Overview
The VisiSonics 5/64 Audio/Visual Camera (“Audio Camera”) consists of five (5) USB 3.0 cameras and sixty-
four (64) omnidirectional electret microphones arranged in a specific pattern on the surface of an aluminum
sphere (8’’ or 20 cm in diameter). The Audio Camera interfaces with a laptop computer provided by and
certified by VisiSonics. The laptop comes with the FINDr software installed. The unit and all accessories are
shipped in a waterproof, foam-filled wheeled case. The case is equipped with four latches that must be
securely fastened for transportation. The laptop, tripod, cables and Audio Camera are all located in cavities in
the foam. The cables include the USB 3.0 cable and power supplies for both the Audio Camera and the laptop.
3.1. Physical camera setup
With Included Tripod
o
Carefully take out the laptop from its slot and place it in a secure location
o
Extract the tripod from its slot
o
Extract the camera from its slot and affix to the tripod
o
Place the camera/tripod stably on a flat surface, taking care to ensure that the suction cup is
adhered firmly to the surface below
With Optional Audio Camera Mount
o
Remove quick release plate from swivel head on the Audio Camera mount
