Mail:
Web:
www.visionxip.com
48
3.
Key in the IP address of the camera and enter "PPPoE Setting" following the
route Setting
Î
Basic Setting
Î
Network
Î
PPPoE.
4.
Key in the xDSL "Username" and "Password" acquired from your ISP. Click
Save to confirm the setting.
5.
Where the ADSL modem and the camera is connected via a switch-hub, you
can press “Reboot” or restart the machine manually to try PPPoE dialing when
the setting of the camera has been completed.
6. A different IP address is obtained after each dial-up network connection. You
can get the new IP address from Setting
Î
Basic Settings
Î
System. If you want
to know the new IP address anytime, you must enter Setting
Î
Basic Settings
Î
Notification to set some settings. There are three ways to get information: 1.
SMTP 2. FTP 3. HTTP. For details, refer to the Notification Setup Menu.
Note: You can use the DDNS function to access the camera. Refer to the “DDNS Setting”
page for more information.
Basic Setting > Network > PPPoE > PPPoE
Dial: You can select whether or not to dial when you boot the machine (On Boot
or Off).
Username: Enter the username provided by your ISP.
Password: Enter the password.
Basic Setting > Network > PPPoE > PPPoE Information
IP Address: The IP address acquired when dialing has been executed
successfully.
Subnet Mask: The subnet mask information acquired when dialing has been
executed successfully.
Default Gateway: The gateway information acquired when dialing has been
executed successfully.
DNS: The ISP domain name acquired when dialing has been executed
successfully.
PPPoE setting
Summary of Contents for VxIP 9211
Page 1: ...VxIP 9211 VxIP 9211w 3GPP PAN TILT NETWORK DOME CAMERA User s Manual Version 1 0 ...
Page 32: ...Mail info visionxip com Web www visionxip com 32 11 Video stream screen ...
Page 53: ...Mail info visionxip com Web www visionxip com 53 ...
Page 56: ...Mail info visionxip com Web www visionxip com 56 Notification setting ...
