manualshive.com logo in svg

VisionxIP VxIP 9211, User Manual

Share
Download
VisionxIP VxIP 9211 User Manual Download Page 22

 

Mail: 

[email protected]

 

Web: 

www.visionxip.com

 

 

22 

5.

 

AutoPan: enables/disables AutoPan.   

You can enable the AutoPan function to make the camera automatically move 
back and forth horizontally. Disable the AutoPan function to stop the scan. 

 
6.

 

Alert: displays alert trigger   

This indicator flashes to warn you when a movement or alert is detected. Click to 
stop the flash. 

 
 
 

 

 
 
7. Warning Message: 
 

Warning Message: The Enable/Disable button is used to start or cancel the display 

warning message function. Once you choose to cancel this function, the 
message will no longer be displayed. 

Save Warning Image: The Enable/Disable button is used to start or cancel the Save 

Warning Image to Snapshot folder function. When the button displays 
Enable, this indicates that you have to click on this button to enable it. If 
the save image function is set to Enable, double-click on the message line 
to pop out the image of this warning. When a warning is triggered, there 
will be a message display (maximum number of warning is 50). After 
exiting this screen, the displayed message will be cleared. (For details on 
Setup, please refer to Setup/Application Setting/Event/Event). 

AutoPan function 

Enable/ disable the alert message 
Save function 

Alert trigger display 

Alert message display area 

Enable/ disable the alert message 
display

Formatted: Bullets and

Numbering

Summary of Contents for VxIP 9211














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands