Mail:
Web:
www.visionxip.com
46
3.
SSID: Enter the server name of the base station.
4.
WEP Encryption: Select the encrypted key that is the same as the base station.
5.
KEY: Select a group that is the same as the wireless base station. You must select
KEY1 for base stations that only have a set of keys.
6.
DHCP ON/OFF: DHCP ON is recommended.
7.
Save the settings.
8.
Restart the rquipment.
Basic Setting > Network > Wireless > Wireless IP Assignment (IP setting in
the wireless networking mode)
DHCP setting:
DHCP (Dynamic Host Configuration Protocol) is a protocol that enables automatic
assignment of TCP/IP information to the client. Each DHCP client connects to the
DHCP server to access its network setting information, including IP address, gateway,
and DNS server.
The IP address of the camera is 192.168.0.20 by default when DHCP is “OFF”. When
you select “DHCP ON” and access to the DHCP network environment, the camera
will automatically send a DHCP packet request an IP address. This IP address is
assigned automatically from the DHCP server on the network. No additional settings
are required for this page unless you need to change the network configuration. The
DHCP status of the camera is “OFF” by default.
Other settings:
For IP address, Subnet mask, Default gateway, DNS 1, and DNS 2, the DHCP server
will assign these values automatically when DHCP is in "ON" status; otherwise, you
need to key in the values manually.
Basic Setting > Network > Streaming (streaming Setting)
Setting of the video streaming port
(HTTP and factory default are recommended)
1.
HTTP: Port 80 can pass through most firewalls. Video streams are transmitted
through HTTP Port (80 by default) to ensure passage through firewalls.
2.
RTSP: Port 554 uses a fixed port (i.e. TCP) or can be defined by users to ensure
reliable data transmission. Video streams are transmitted through RTSP Port (554
by default) to avoid video fragment or mosaics due to poor transmission quality.
3.
RTP: Port 50000 to 60000 are UDP ports and can be defined by users. They
provide the fastest but also most unreliable transmission service. Video streams
are transmitted through UDP Port (50000~60000 by default) to ensure the fastest
image transmission. However, video fragment or mosaics may occur due to poor
transmission quality.
Summary of Contents for VxIP 9211
Page 1: ...VxIP 9211 VxIP 9211w 3GPP PAN TILT NETWORK DOME CAMERA User s Manual Version 1 0 ...
Page 32: ...Mail info visionxip com Web www visionxip com 32 11 Video stream screen ...
Page 53: ...Mail info visionxip com Web www visionxip com 53 ...
Page 56: ...Mail info visionxip com Web www visionxip com 56 Notification setting ...
