Page 35 of 72
Example 1
Suppose you want to start and stop your recording on one camera
within the same day every weekday, say 9:00 to 17:00 from Monday to
Friday. You should go to the schedule weekday recording menu, check
on the desired camera, enter 9:00 in the start time input, 17:00 in the
end time input, then enter the frame rate you want and finally click OK
to confirm.
You will see the green indicator light of that camera in the RECORDER
panel at 9:00 to 17:00 to indicate that scheduled recording is taking
place.
Example 2
Suppose you want to start recording one camera at 18:00 and stop at
6:00 the next day, for everyday from Monday to Friday.
You should go to the schedule weekday recording menu, check on the
desired camera, enter 18:00 in the start time input, 6:00 in the end time
input, then enter the frame rate you want and finally click OK to
confirm.
In this case, the recorder will start at Monday 18:00 and then stop at
Tuesday 6:00 and the schedule continues every weekday. While on
Friday, the recorder would start at 18:00 as usual but it would stop on
Saturday at 0:0.
Therefore, you should enter another schedule for weekend recording to
fit your scheduled planning as a whole.
Audio Recording
Go to the "Options Setting" Chapter for further details.
VisionNet SW-80 User Menu
Summary of Contents for SW-80
Page 1: ...VisionNet Technology VisionNet Network DVR SW 80 User Manual...
Page 50: ...Page 49 of 72 VisionNet SW 80 User Menu This is a blank page...
Page 51: ...Page 50 of 72 VisionNet SW 80 User Menu This is a blank page...
Page 52: ...Page 50 of 72 VisionNet SW 80 User Menu This is a blank page...
