Page 15 of 72
RECORDING
Storage drive
will automatically detect available fixed hard disk(s) in the unit for
recording for “Normal” backup mode of operation.
will directly record into the active removable hard disk in the unit
for “Archive” backup mode of operation.
Notes: The active (selected) drive should be assigned properly before the
overall backup and restore operation is executed. Assign the target drive inside
the “Insert drive” message box by clicking the “Swap Drive” button while the
system is operated in “Archive” backup mode. Go to the “Option Setting”
chapter for further detail.
Recording modes
According to the recording initiation method, four different modes are
available for selection in SW-80
Instant recording
Scheduled recording
Pre-alarm recording
Alarm recording
Multiple camera
recording
All cameras can be recorded independently.
Each camera will be recorded into individual video file(s).
The camera ID, start date/time, and the recording mode of the individual
camera will be logged with database management.
The recorder control
panel
a “RECORDER” panel (see Figure 7) to let the user interact with
the unit for recording control with enough indication.
There are sixteen camera buttons in the “RECORDER” panel, all of which can
be toggled on or off.
Each button has four built-in indicators with different colors to indicate
different recording modes and statuses.
The available indicator colors are yellow, red, light blue and green,
respectively.
Yellow -- the corresponding camera is performing instant recording, which
is initiated by the pressing down of the button manually.
Red -- the corresponding camera is under alarm recording, which is
initiated by the alarm input or by motion detection.
Light blue -- that the pre-alarm function of that camera is activated.
Green -- the corresponding camera is under scheduled recording, which is
controlled by the programmable timer.
Figure 7
Camera buttons
Camera button pressed down
to start instant recording.
Yellow indicator represent
instant recording of the
camera is taking place.
Green indicator signifies that
timer recording of the camera is
taking place.
Red indicator represent
alarm recording of the
camera is taking place.
Light blue indicates that
pre-alarm is activated
VisionNet SW-80 User Menu
SW-80
SW-80
SW-80 has
Summary of Contents for SW-80
Page 1: ...VisionNet Technology VisionNet Network DVR SW 80 User Manual...
Page 50: ...Page 49 of 72 VisionNet SW 80 User Menu This is a blank page...
Page 51: ...Page 50 of 72 VisionNet SW 80 User Menu This is a blank page...
Page 52: ...Page 50 of 72 VisionNet SW 80 User Menu This is a blank page...
