Page 10 of 72
DISPLAY (THE MULTIPLEXER FUNCTION)
Display control
panel
a unique Graphical User Interface (GUI) design for display
control. A “DISPLAY” panel is implemented on the upper right hand corner of
the main screen so that the user can interact with the unit more easily.
The “DISPLAY” panel consists of “display mode” buttons, “camera” buttons and
a “sequence” button respectively
All of the push buttons have their individual built-in indicator lights. Once the
button is pressed, it toggles on and off with the indicator light on and off to
indicate its status correspondingly.
Tip:
You are able to know which camera(s) is/are being displayed by the
“DISPLAY” panel indicator lights, and you can press the buttons on
the “DISPLAY” panel to enter your display input right away.
Figure 2-1
Tip:
No camera button can be selected prior to the mode selection. User
should click on one of the display mode button first.
Multi-Screen mode buttons
1-Screen mode button
Sequence button
Camera buttons
Camera button pressed
down to start display.
Yellow light indicator
represent the camera is
displaying.
16-Screen mode button
4-Screen mode button
Display Panel
VisionNet SW-80 User Menu
SW-80 uses
Summary of Contents for SW-80
Page 1: ...VisionNet Technology VisionNet Network DVR SW 80 User Manual...
Page 50: ...Page 49 of 72 VisionNet SW 80 User Menu This is a blank page...
Page 51: ...Page 50 of 72 VisionNet SW 80 User Menu This is a blank page...
Page 52: ...Page 50 of 72 VisionNet SW 80 User Menu This is a blank page...
