OSD SET
The
OSD SET
sub-menu allows you to define what information is shown on the AV output and what
information is recorded with the video.
As has been described previously use the arrow and ENTER buttons on the r/c to highlight and
change the settings (unless otherwise described).
REAL TIME DISPLAY
Use this option to display the time
on the monitor.
Normally this will be turned on (YES)
RECORD OVERLAY DISPLAY
Use these options to configure what
information is embedded
(watermarked) with the Video.
Normally only Time and Number
(Vehicle Reg.) are selected.
DEF CHANNEL and Delay
The
Def Channel
defines the default AV channel/
channels that are output to the monitor – the
options are to show an individual camera, a split
screen (2 cameras side by side), or all 4 cameras.
The
Delay
option sets the time for which all 4
cameras are displayed on the AV Output before the
output is switched to the default AV channel. This
feature is used to allow the driver to check all
cameras are working before leaving the depot.
To change the delay time highlight the time and use
the numeric buttons on the r/c to set the new time.
To delete a number press the
DEL
button on the r/c.
To save a change use the arrow buttons
on the r/c to highlight the
SAVE
option
and press the
ENTER
button to save the
changes.
