vision trimline TL73, Installation Instructions Manual

Page: 6 / 28

2.0 POSITIONING THE APPLIANCE
2.6 Fitting the Carrara / Basalt stones (see appendix 6)

Scatter vermiculite evenly over the burner tray. Make sure the pilot light remains unobstructed.

Fill the burner tray and burner plate neatly and evenly with the stones.

Reinstall the window, following the instructions for removing it in reverse order.

Before replacing the window make sure if there must be a restriction plate to be placed or not. See
chapter 6 "Concentric chimney lay out" .

If there is a restriction required for your situation, remove the baffle plate (see Appendix 4) by unscrewing
it from the front of the plate after the plate backwards and then out. Now install the restrictor plate with
two screws and replace the baffle plate.

Now place the window in reverse order as described at 2.2 on Appendix 3.
PAGE 6
IMPORTANT:
Make sure the pilot light remains unobstructed.