![background image](http://html.mh-extra.com/html/vision-fitness/t60/t60_service-manual_1031997036.webp)
33
7.6 RUNNING BELT REPLACEMENT
1) Remove the motor cover as outlined in Section 7.1.
2) Remove the rear roller as outlined in Section 7.2.
3) Remove the front roller as outlined in Section 7.4.
4) Remove the deck as outlined in Section 7.5.
5) Remove the running belt and replace it with a new belt (Figure A).
NOTE:
A new running belt should ALWAYS be installed on a new deck
surface (the deck should either be flipped or replaced).
6) Reverse Steps 1-5 to install a new running belt.
7) Center and tension the belt as outlined in Section 3.2.
FIGURE A
CHAPTER 7: PART REPLACEMENT GUIDE