Vishay G4-DT, Technical Manual, Page: 69 / 174

G4 Multi Channel Force Instrument
4-29
Range/Alternatives Explanation and
<default value> result of alternatives.
Menus ‘Level 1’ – ‘Level 32’
NOTE: There are 32 levels each with the following parameters described below.
Level 1 Source ( - Level 32 Source)
Not in use
Sum
Difference
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 8
Input A Force
Input B Force
Input C Force
Input D Force
< Not in use > Defines the signal to be supervised by the Level Supervisor. See
detailed description of Function Block in chapter 3 for a detailed
explanation of the different signals. The actual values of the
respective signals are affected by the Function Block settings.
The Function Block to use is selected with parameter
Level 1 Function Block.
Not in use: The level is not used. Any outputs set to work with
this level will be off.
Sum: The level supervises the Sum.
Difference: The level supervises the Difference.
Output 1: The level supervises Output 1.
Output 2: The level supervises Output 2.
Output 3: The level supervises Output 3.
Output 4: The level supervises Output 4.
Output 5: The level supervises Output 5.
Output 6: The level supervises Output 6.
Output 7: The level supervises Output 7.
Output 8: The level supervises Output 8.
Input A Force: The level supervises the force of Input A.
Input B Force: The level supervises the force of Input B.
Input C Force: The level supervises the force of Input C.
Input D Force: The level supervises the force of Input D.
Level 1 Mode ( - Level 32 Mode)
Normal
Absolute
< Normal > This parameter defines the mode of operation for the selected
level supervisor.
Normal: The level is active when the selected signal is above
(more positive) the set level.
Absolute:
The level is active when the absolute value of the
selected signal is above (more positive) the set level.
Note: This parameter is only shown if ‘Level 1 Source’ is not set
to ‘Not in use’.