Vishay G4-DT, Technical Manual, Page: 55 / 174

G4 Multi Channel Force Instrument
4-15
Range/Alternatives Explanation and
<default value> result of alternatives.
Menus ‘Function Block 1’ – ‘Function Block 8’
The Calibration menu contains up to 8 sub menus, one for each used Function Block.
The parameters are the same for all 8 menus. Here only Function Block 1 parameters
are shown. Note that the Function Block number is shown as a prefix to the parameter
name, here ‘1:’ Also note that the menu is only shown if the parameter
‘Func. Block X Type’, for the actual Function Block, is not set to ‘Not In Use’.
1:Function Block Name
<> A 16-character string that is used on the display, at printing, in
reports etc.
1:Sum Graph Max
Range:
0.001 to 999999
Unit:
Measurement or
Web Tension unit
<1000> Sets the value that maximum indication on the sum graph
corresponds to. The sum graph is displayed on the single and
dual Function Blocks operating display.
1:Diff. Graph Max
Range:
0.001 to 999999
Unit:
Measurement or
Web Tension unit
<100> Sets the value that maximum indication on the difference graph
corresponds to. The difference graph is displayed on the single
and dual Function Blocks operating display.
Note: this parameter is only shown if the parameter
‘Func. Block 1 Type’ is set to ‘2 Channel’ or ’4 Channel’
1:Web Tension Mode
Off
On
<Off> Selects Force or Web Tension mode for the Function Block.
Off: Force mode.
On: Web Tension Mode.