Visatron 10980, Operating Instructions Manual, Page: 35 / 73

VN 116 / 93
and
VN 215 / 93
only
see Table 2
3. 08
Operating Instruction Visatron VN 93
To perform a reset after an alarm during normal operation mode:
- By touching the light-sensitive button "RESET / ENTER " for longer than 1 second
Subsequently, the following is displayed at the display window:
- Display "CODE" : -215 (-116) (-115)
representing the type of device VN215, VN116 or VN115
- Display "VALUE" : 0
- LED - Chain bottom LED on, all others off
- LED "READY": on
- LED "TEST": off
- LED "ALARM":
off
- On devices VN 215 / 93 and VN 116 / 93 only:
All valves in the valve box will be opened, all 10 red symbols are visible.
In case that the opacity is still higher than the damage check level
(after resetting the device) the damage check will start again.
Display and function in case of malfunction
In case of a malfunction the following is displayed at the display window:
Display "CODE" : Exxx (xxx = error code e.g. E 014)
Display "VALUE" : yyyy (yyy = value giving detailed information to the
error code)
LED - Chain
bottom LED on, all others off
LED "READY": off
LED "TEST": off
LED "ALARM":
off
For more information please refer to chapter 5 "Malfunction" !
06. 04