VIRTUFIT Elite Comfort, User Manual

Page: 28 / 40

EN
VirtuFit Elite Comfort Treadmill
28
CONTROL PANEL
24 186 118 118 44 167 106 106 67 145 92 92
25 185 117 117 45 166 105 105 68 144 91 91
26 184 116 116 46 165 104 104 69 143 91 91
27 183 116 116 47 164 103 103 70 143 90 90
28 182 115 115 48 163 103 103 71 142 90 89
29 181 115 115 49 162 103 103 72 141 90 89
30 181 114 114 50 162 102 102 73 140 90 88
31 180 113 113 51 161 101 101 74 139 90 88
32 179 113 113 52 160 101 101 75 138 90 87
33 178 112 112 53 159 100 100 76 137 90 86
34 177 112 112 54 158 100 100 77 136 90 86
55 157 99 99 78 135 90 85
56 156 98 98 79 134 90 85
57 155 98 98 80 133 90 84
L-H: HEART RATE RANGE (LOWEST-HIGHEST).
1. In standby mode, press “PROGRAM” button continuously until HRC appears in distance window.
NOTE:
AIf you press “START” directly under HRC mode, the system will recommend a parameter under
age 30target heart rate 114 and max speed 10Km/h.
2. After choose HRC program, press “MODE” for three seconds to enter into age setting. Time window will
show default age 30. You can reset by pressing “-” and “-SPEED+” buttons. Age setting range
is from 15 to 80.
3. After setting age, press “MODE”, system will recommend a suitable target heart rate for reference. You
can reset from 84 to195 by pressing “-” or “-SPEED+”.
4. After setting target heart rate, press “MODE” to set maximum speed by pressing “-” or
“-SPEED+”. Speed setting range is 3.0-18.0Km/h.
5. After setting maximum speed, press “MODE” to enter into time setting. “TIME”window will show
default time10:00, press “-” or “-SPEED+” to reset from10:00 to 99:00.
6. After setting the above data, press “MODE” to enter standby mode and press “START” to begin exercise.
All the setting data is for single use, when finish running, the date will swept off.
7. You can adjust the incline and speed during exercise by“-SPEED+” and “-”. But the system will
change the speed and incline automatically according to the target heart rate.