VIRTUFIT Elite Comfort, User Manual

Page: 16 / 40

EN
VirtuFit Elite Comfort Treadmill
16
LEVELING THE TREADMILL
You can balance the treadmill by adjusting
the foot pad (B02) if the ground is uneven;
Turn the foot pad (B02) to the left side by
cross solid wrench (B08) will increase the
height and turn to the right side will decrease
the height.
RUNNING BELT ADJUSTMENT
01. Running belt deviates to left: Start the machine, set speed at 2-3 km/h without a load on the belt,
use Allen key to turn the screw 1/4 turn (see fig. 1). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt becomes central.
02. Running belt deviate to right: Start the machine, set speed at 2-3 km/h without a load on the belt,
use Allen key to turn the screw 1/4 turn (see fig. 2). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt becomes central.
03. Running belt jam: If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a
turn both left and right until the jam solved (see fig 3).
LEVELING ADJUSTMENT