VIRTUFIT Elite Comfort, User Manual

Page: 23 / 40

EN
VirtuFit Elite Comfort Treadmill
23
CONTROL PANEL
BUTTON FUNCTION
START
When getting through the power and safety key attached, press this button at any
time, ready for 3 seconds and then the machine will start.
STOP
When running, press STOP key once the treadmill will be paused and the screen
shows “PAU”. The system will keep your running data and you can press “START”.
Press the STOP key twice the treadmill will stop .All the data will clear and go back
to standby mode.
MODE
Press to choose running mode on standby mode: include time countdown
mode”30:00”, distance countdown mode”1.00”, calorie countdown mode”50.0”,
step countdown mode”5000”. The window will flash all the time when you choose
the function. Press SPEED+/- or /- button to set the data and press START
button to start running.
PROGRAM
Press this key to choose suitable program. The programs are: P1 (CLIMB), P2
(INTERVAL), P3 (LOSEWEIGHT), P4 (WALK), P5 (RUN), P6 , P7, P8, P9, P10, .....P24,
U1,HRC, FAT.
QUICK
PRORAM
BUTTONS
You can chose MANUAL, P1(CLIMB),P2(INTERVAL),P3(LOSE WEIGHT),P4(WALK),P5
(RUN) ,the screen will show the TIME “30:00”, at this time you press the button of
, INCLINE -, SPEED + , SPEED- can change the setting time from 30:00 to
any time you want . Or maybe you do not want to change the time you can press
the START button right away.
- SPEED +
In setting mode it can change the target data and in normal working mode it can
change the speed by 0.1km/h per time. When you press “-SPEED+” key lasting for
0.5 sec the speed data will change continuously.
- I
In setting mode it can change the target data and in normal working mode it can
change the incline by 0.1 sectionper time. When you press “-” key lasting
for 0.5 sec the incline data will change continuously.
INCLINE
3 5 7 9
Incline quick buttons, press to choose incline section.
SPEED
4 6 8 10
Speed quick buttons, press to choose speed.