VIRTUFIT Elite Comfort, User Manual

Page: 20 / 40

EN
VirtuFit Elite Comfort Treadmill
20
TROUBLE SHOOTING
The display shows E06 after switching on open circuits of the motor
• Reconnect the motor wire.
• Replace the motor.
The display shows E08 after switching on: indicates an error in the memorizer 24C02
• The memorizer IC is not properly connected, please reconnect.
• The memorizer IC is broken, replace the IC.
The display shows E10 after switching on: direct short circuit of the motor
• The control panel coupling is too large, then adjust the torque potentiometer to adjust the reduce
torque value.
• The motor has a short circuit, replace the motor.
• The moving parts are shaken, please adjust and coat them with oil.
The display shows E13 after switching on: communication error from the control panel to the display
• Check the wire from the control panel to the display, if the wire is broken, change it than for a new
one.
• Check the electronic parts of the display, replace for a new display like this is out of order.
• A new control panel.