Virax Siberia, User Manual, Page: 20 / 152

20
EN
Choosing freezer heads
The table below shows the various freezer heads supplied with the Siberia® freezer
Ref. Gr. Ø Cu Ø Cu Ø Fe
221026 II 12mm 1/2" -
221027 III 14/15mm - 1/4"
221028 IV 16mm 5/8" -
221029 V 18mm - 3/8"
221031 VII 22mm 7/8" 1/2"
221033 A 28mm - 3/4"
221036 D 35mm 1.3/8" 1"
221037 E 42mm - 1.1/4"
Indicative freezing times
Times (in minutes) are supplied for information only. They are given, for an ambient temperature of
20°C and for water at a temperature of 15°C. These values can vary.
Series / Option Ref. Gr. Ø Cu Ø Cu Ø Fe time
Optional parts 221025 I + E 10mm 3/8" 1/8" 4min
Supplied with Siberia® 221026 II + E 12mm 1/2" - 4min
Supplied with Siberia® 221027 III + E 14/15mm - 1/4" 5min
Supplied with Siberia® 221028 IV + E 16mm 5/8" - 6min
Supplied with Siberia® 221029 V + E 18mm - 3/8" 8min
Optional parts 221030 VI + E 20mm 3/4" - 10min
Supplied with Siberia® 221031 VII + E 22mm 7/8" 1/2" 12min
Optional parts 221032 VIII + E - 1" - 15min
Supplied with Siberia® 221033 A 28mm - 3/4" 17min
Optional parts 221034 B - 1.1/8" - 20min
Optional parts 221035 C 32mm 1.1/4" - 22min
Supplied with Siberia® 221036 D 35mm 1.3/8" 1" 24min
Supplied with Siberia® 221037 E 42mm - 1.1/4" 56min
Optional parts 221038 F - - 1.1/2" 70min
Optional parts 221039 G 54mm 2.1/8" - 75min
Clamps without heads 2" 110min
The freezer can be used on copper and steel tubes with dimensions in inches.
Maintenance
In order to increase the lifetime of your Siberia freezer, observe the following instructions:
•
Clean the freezer heads and the refrigerating clamps on a regular basis.
•
Regularly clean the grills in order to augment the life duration of the freezer unit.
•
Do not obstruct the air vent.
For all other maintenance operations, return the unit to Virax after-sales service.
Important:
Any maintenance operation undertaken by a person external to Virax cancels the guarantee.