© 2008 Directed Electronics- All rights reserved.
13
Valet/Program Switch, 2-Pin BLUE Plug
The Valet/Program button should be accessible from the driver’s seat. It plugs
into the BLUE port on the side of the unit. Since the system features Valet®
by using the remote transmitter, the button can be well hidden. Consider how
the button will be used before choosing a mounting location. Check for rear
clearance before drilling a 9/32-inch hole and mounting the button.The GRAY
wire in the two-pin plug may also be used as a (+) ghost switch input and can
be connected to any (+) switch in the vehicle. (See
Feature Descriptions
section of this guide.)
Programmer Interface, 3-Pin BLACK Plug
The BLACK three-pin port connection is for programming the unit.
When using the 998T Bitwriter®, it is possible to configure any and
all of the programmable functions. For more information please refer
to the guide packaged with the programmer.