© 2008 Directed Electronics- All rights reserved.
35
Troubleshooting
Starter kill doesn’t work.
Is the correct starter wire being interrupted? If the car starts when the
•
starter kill relay is completely disconnected, the wrong starter wire has been
cut and interrupted.
YELLOW wire is not connected to true ignition. It is connected to an
•
accessory circuit.
Shock sensor doesn’t trigger the alarm.
Has the NPC
•
®
system been triggered? If so, you will hear five chirps when
disarming. To check this, turn the ignition key on and off to clear the NPC
®
from memory, and then retest the shock sensor. For a detailed description of
NPC
®
, see Owner’s Guide.
Door input does not immediately trigger full alarm. Instead, I hear
chirps for the first three seconds.
That’s how the progressive two-stage door input works! This is the instant
•
response feature of this system. Even if the door is closed immediately, the
system provides an instant trigger by chirping, and the progressing to a
constant siren.
Closing the door triggers the system, but opening the door does not.
Have you correctly identified the type of door switch system? This happens
•
often when the wrong door input has been used.