Manual VIPA System SLIO
Safety information
HB300E - PS-CM - Rev. 11/28
3
Safety information
The System SLIO is constructed and produced for:
•
communication and process control
•
general control and automation applications
•
industrial applications
•
operation within the environmental conditions specified in the technical
data
•
installation into a cubicle
Danger!
This device is not certified for applications in
•
in explosive environments (EX-zone)
The manual must be available to all personnel in the
•
project design department
•
installation department
•
commissioning
•
operation
The following conditions must be met before using or commissioning
the components described in this manual:
•
Modification to the process control system should only be carried out
when the system has been disconnected from power!
•
Installation and modifications only by properly trained personnel
•
The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
Applications
conforming with
specifications
Documentation
Disposal
Summary of Contents for SLIO 001-1BA00
Page 1: ...VIPA System SLIO PS CM Manual HB300E_PS CM Rev 11 28 July 2011...
Page 4: ...Contents Manual VIPA System SLIO ii HB300E PS CM Rev 11 28...
Page 8: ...Safety information Manual VIPA System SLIO 4 HB300E PS CM Rev 11 28...
Page 48: ...Chapter 3 Clamp modules Manual VIPA System SLIO 3 8 HB300E PS CM Rev 11 28...