Chapter 1 Basics and Assembly
Manual VIPA System SLIO
1-12
HB300E - PS-CM - Rev. 11/28
•
For mounting turn all the locking lever of the head module to be mounted
upwards.
•
To mount the head module put it to the left module and push it, guided
by the stripes, to the mounting rail.
•
Turn all the locking lever downward again.
•
Plug again the electronic module, which you have removed before.
3
4
5
•
Remove if exists the wiring of the module group. More about this may be
found at "Wiring".
•
Press the unlocking lever at the lower side of the just mounted right
module of the module group and pull it forward.
•
Turn all the locking lever of the module group to be exchanged upwards.
1
Exchange of a
module group
Summary of Contents for SLIO 001-1BA00
Page 1: ...VIPA System SLIO PS CM Manual HB300E_PS CM Rev 11 28 July 2011...
Page 4: ...Contents Manual VIPA System SLIO ii HB300E PS CM Rev 11 28...
Page 8: ...Safety information Manual VIPA System SLIO 4 HB300E PS CM Rev 11 28...
Page 48: ...Chapter 3 Clamp modules Manual VIPA System SLIO 3 8 HB300E PS CM Rev 11 28...