Manual VIPA System SLIO
Chapter 1 Basics and Assembly
HB300E - PS-CM - Rev. 11/28
1-17
To attach the shield the mounting of shield bus carriers are necessary.
The shield bus carrier (available as accessory) serves to carry the shield
bus to connect cable shields.
The shield bus carrier is mounted underneath the terminal of the terminal
module. With a flat mounting rail for adaption to a flat mounting rail you may
remove the spacer of the shield bus carrier.
After mounting the shield bus carrier with the shield bus, the cables with the
accordingly stripped cable screen may be attached and fixed by the shield
clamp.
Clack
1
2
3
4
[1] Shield bus carrier
[2] Shield bus (10mm x 3mm)
[3] Shield clamp
[4] Cable shield
Shield attachment
Summary of Contents for SLIO 001-1BA00
Page 1: ...VIPA System SLIO PS CM Manual HB300E_PS CM Rev 11 28 July 2011...
Page 4: ...Contents Manual VIPA System SLIO ii HB300E PS CM Rev 11 28...
Page 8: ...Safety information Manual VIPA System SLIO 4 HB300E PS CM Rev 11 28...
Page 48: ...Chapter 3 Clamp modules Manual VIPA System SLIO 3 8 HB300E PS CM Rev 11 28...