63
VK2-600PTZ User manual
ERASE PROGRAMMED DATA
AUTO SCAN : ON
PRESET : ON
TOUR : ON
PATTERN : ON
AREA TITLE : ON
PRIVACY ZONE : ON
CAMERA : ON
DOME SETUP : ON
ERASE
SAVE AND EXIT(ESC TO CANCEL)
PRESET FOCUS DEFAULT
Use the
Joystick
to move the cursor and
(Tele/Wide)
to adjust. To save changes highlight
‘SAVE AND EXIT’ and move
Joystick
right.
Joystick
left exits without saving.
This menu set the default mode of the focus when you save the Preset.
PRESET FOCUS DEFAULT
FOCUS : AUTO
SAVE AND EXIT(ESC TO CANCEL)
FOCUS
: AUTO / MANUAL / ONE PUSH
• ORIGIN OFFSET
Use the
Joystick
to move the cursor and
(Tele/Wide)
to adjust. To save changes highlight
‘SAVE AND EXIT’ and move
Joystick
right.
Joystick
left exits without saving.
OFFSET SETUP
(CTRL KEY)
TILT OFFSET : 000.0
ENABLE : OFF
SAVE AND EXIT(ESC TO CANCEL)
This feature is useful in aligning a new dome camera exactly the same as the previously installed
Dome c
amera. Dome camera’s origin set and all data initialize option do not override offset
values. Only the default set option in this menu will set the offset value to zero. This can be used
to avoid ceiling obstructions.
