60
VK2-600PTZ User manual
• OSD DISPLAY
Use the
Joystick
to move the cursor, right to select sub menu (if applicable) and
(Tele/Wide)
to
adjust. To save changes highlight ‘SAVE AND EXIT’ and move
Joystick
right.
Joystick
left
exits without saving.
OSD DISPLAY SETUP
CAMERA TITLE : DOMEID
VIEW DIRECTION : OFF
DOME OSD : ON
AREA TITLE : OFF
PRESET TITLE : CONSTANT
FOCUS EXPOSURE : ON
OSD POSITION SETUP
SAVE AND EXIT(ESC TO CANCEL)
CAMERA TITLE
: up to 6 characters.
VIEW DIRECTION
: ON / OFF
‘ON’ sets current direction as N (North) and the coordinate angle to 000. ‘OFF’ hides the
directional title. Every 90 degrees of clockwise rotation will change the title to E (East), S
(South), W (West). If using the ON/OFF option frequently, it is recommended that you set
‘North’ as a Preset. Recall the ‘North’ Preset before enabling the directional title.
DOME OSD
: ON / OFF
All display or title will disappear when DOME OSD DISPLAY sets OFF
AREA TITLE
: ON / OFF
If this option is enabled, the area title displays when the camera moves.
NOTE:
The DOME OSD DISPLAY must be enabled.
PRESET TITLE
: CONSTANT / OFF / 3, 30, 60,120,180 seconds
Set the Preset title display time.
FOCUS EXPOSURE
: ON / OFF
ON: FOCUS and EXPOSURE displays. (AF AE)
OSD POSITION SETUP
Select the OSD option with the
Joystick
up and down, press the
(IO/FN)
key and adjust
the position by the
Joystick
. Press the
(IC/FF)
key to release.
(AREA TITLE) (AF AE)
(FUNC TITLE )
(CTRL KEY TO MOVE)
SAVE AND EXIT(ESC TO CANCEL)
DOMEID…XXXX
XXX.X
XXX.X
