•
Rescrew the Lock screws (1) please see picture 1.
•
Pull the door (5) outward, take it out (please see picture 2.)
•
Screw off 3 pcs bolts, take out the top hinge (right) 4. (please see picture 3)
Fix the top hinge (left) with bolts on the position as picture shows, then install the door as the
way it pulls out, then steps finish (please see picture 4)
Attention
•
Store wine in sealed bottles
•
Do not overload the cabinet
•
Do not open the door unless necessary
•
Do not cover shelves with aluminium foil or any other shelf material which may prevent air circu-
lation.
•
Should the beverage centre be stored without use for long periods, it is suggested, after a careful
cleaning, to leave the door ajar to allow air to circulate inside the cabinet in order to avoid possi-
ble formation of condensation, mold or odors.
Operating your Beverage Centre
The Beverage centre should be placed in an area where the ambient temperature is between 0 -
38
o
C. If the ambient temperature is above or below this range, the performance of the unit may be
affected. For example, placing your unit in extreme cold or hot conditions may cause interior tem-
peratures to fluctuate and therefore required temperature may not be reached.
RUN
Indicator light illuminates to signify the cooling mode is currently in operation
Light
To control the inner light turn on/off
Power
To control this appliance turn on/off
“Up” Button
Used to raise (warm) the temperature in 1
o
C.
“Down” Button
Used to lower (cool) the temperature in 1
o
C.
“Display”
To show the temperature of the internal cabinet.
Setting the Temperature Control
•
To set the temperature:
Connect the power cord to a properly grounded outlet. In the event of a power interruption, all
previous temperature settings are automatically erased and it will default to a preset temperature
setting of 5
o
C.
Summary of Contents for v40bvc
Page 9: ......
