V40 Series - Under Bench Installation Instructions
1.
Cabinet dimensions: H 820 x W 595 x D 572 mm
2.
Please note that a minimum cut out of 615mm is required to facilitate installation, removal
and servicing.
3.
This cabinet requires 1cm clearance on both sides and top, 4 cm clearance at the rear. A
ventilation grid is required (see above diagram for positioning of grid)
4.
This cabinet is front venting - if kick board is to be used it will need a grille to allow adequate
in and out flow of air.
5.
The power point should be offset for easy access.
6.
The diagram below shows details of vent and door measurements.
Summary of Contents for v40bvc
Page 9: ......
