10
904107 REV C 4/13/15, INST 69 FIREBIRD w/o AC CNTRL PNL PG 10 OF 17
Factory Stud
Control Panel
1/8” Nylon Flat Washer
49705-VUI
1/16” Nylon Flat Washer
49704-VUI
1/16” Nylon Flat Washer
49704-VUI
OEM Heat/Cool Control Lever
OEM Plastic Bushing
Heat/Cool Control Bracket
644016
Heat/Cool Control
Bracket
644016
OEM Spring Washer
OEM Retainer Ring
4-40 Nyloc Nut
4-40 x 5/8” PH
Pan Head Screw
3/16” Nylon Flat Washer
180384
Slide Pot Push Rod
1/8” Nylon Insert
49700-VUI
#8 Flat Washer
8-32 Nyloc Nut
8-32 x 3/4”
PH Pan Head
Screw
128 ID/.198 ID x .313 OD x .375 L
Nylon Spacer
180041-SSR
3/16” Flat Washer
Slide Pot
Cable Clamp
Figure 9
Figure 9a
Figure 9b
Cold/Hot Slide Pot Assembly Installation
1.
Install OEM Heat/Cool control lever, Heat/Cool control bracket and slide pot assembly as shown in
Figure 9, below.
2.
Secure the slide pot assembly to the control panel as shown in Figures 9a and 9b, below.
3.
Since the slide pot assembly can slide back and forth in the the clamp. Before the screw is tightened, position
such that the flat part of the rod is as close to flush as possible with the end the of housing at the lever’s
innermost position.
Summary of Contents for Firebird 1969
Page 17: ......
