6
904107 REV C 4/13/15, INST 69 FIREBIRD w/o AC CNTRL PNL PG 6 OF 17
1. Install slide pot lever push rod onto Dash/Floor/Defrost lever as shown in Figure 5, below.
2. Secure the slide pot assembly to the control panel as shown in Figure 5a, below.
3. Since the slide pot assembly can slide back and forth in clamp before screw is tightened, position such that
the flat part of the rod is as close to flush as possible with the end of the housing at the lever’s innermost
position.
Dash/Floor/Defrost
Slide Pot Assembly Installation
4-40 Nyloc Nut
8-32 Nyloc Nut
4-40 x 5/8”
PH Pan Head
Screw
8-32 x 3/4” PH Pan
Head Screw
Control Panel
Control Panel
Brace
1/8” Nylon Flat Washer
49705-VUI
1/16” Nylon Flat Washer
49704-VUI
Slide Pot Push Rod
1/8” Nylon Insert
49700-VUI
#8 Flat Washer
Top Side of
Control Panel
End of
Housing
End of Rod
Flat Section
Flush
1/8” Max
NOTE: Do not allow rod to separate
housing when rod is in
innermost position.
Rod Shown in Approx.
Innermost Position
OEM Dash/Floor/Def
Lever
1/4” Nylon
Flat Washer
180385
Slide Pot
Cable Clamp
3/16 Flat Washer
Figure 5
Figure 5a
Summary of Contents for Firebird 1969
Page 17: ......
