12
901155 REV A 2/22/10, INST 1962-65 NOVA EVAP PG 12 OF 23
ROUTE HEATER HOSE FROM WATER PUMP TO THE HEATER LINE COMING THROUGH THE FIREWALL AS
SHOWN IN FIGURE 9, BELOW. SECURE USING HOSE CLAMPS.
ROUTE HEATER HOSE FROM THE INTAKE TO THE HEATER LINE COMING THROUGH THE FIREWALL AS SHOWN
BELOW. NOTE: INSTALL HEATER CONTROL VALVE IN-LINE WITH INTAKE MANIFOLD (PRESSURE SIDE) HEATER
HOSE, SECURE USING HOSE CLAMPS AS SHOWN.
NOTE PROPER FLOW DIRECTION.
HOSE SHOULD PROTRUDE THROUGH THE FIREWALL COVER SLIGHTLY TO CLOSE THE GAP BETWEEN THE
ALUMINUM LINE AND THE FIREWALL COVER. SEAL ANY REMAINING GAP WITH RTV SILICONE.
#10 SUCTION
LINE
FIGURE 9
O-RINGS
#6 A/C
HARDLINE
HEATER
HOSE
HEATER HOSE & HEATER CONTROL VALVE INSTALLATION
FROM HTR CNTRL VLV
TO EVAPORATOR
FROM INTAKE
MANIFOLD
FROM EVAPORATOR
TO WATER PUMP
