- - 8 - -
Chapter 3: Setup your Daisy Chain Systems.
1. Unpack all the towers and place them on a secure elevated surface.
2. Arrange all of the towers in order based on the preset Daisy Chain configuration located
on the back of every tower:
a. Locate the configuration label on each box that identifies that tower as the FIRST,
MIDDLE (Optional), or END unit. When setting up, the duplication towers should
be arranged according to its label.
Note: If your system has ONLY 2 towers, the MIDDLE tower will not exist and all
mention of it can be ignored throughout this guide.
b. The system labeled as FIRST should be the first and primary tower in the Daisy
Chain configuration. The system labeled END should be the last tower positioned
in the Daisy Chain configuration.
c. If any system(s) are labeled MIDDLE, they should be arranged between the
FIRST and END towers (there is no particular order for the MIDDLE towers as
long as they are placed between the FIRST and END towers).