- - 15 - -
Step 2:
Press “ENT”/Enter button to enter the Hard Drive Setup menu.
If the current source is not Hard Drive, you will see the screen below. Please press
the “ENT”/Enter button once to proceed.
Once you’ve entered the Hard Drive Setup menu, you will see following screen:
Step 3:
Use the up or down button to locate the Load Partition menu; as shown in the
reference screen shot below.
Step 4:
Press the “ENT”/Enter key to enter the Load Partition menu and you should see the
following screen.
You have a choice when loading your master disc content into the hard drive by pressing the
up or down button to find your desired partition naming method:
Option 1:
Manually create a new partition/image
Option 2:
Overwrite one of the existing partitions/images (if any exists, including the reserved
partition/image)
Option 3:
Choose Auto Generate to have the system automatically generate a partition/image name
for you.
Hard Drive Setup
1.Select Partition
Hard Drive Setup
2.Load Partition
Select HDD as source
OK?
Load Partition[004/149]
Load►New Partition
The “004” indicates the number of GB you’ve already used on
the Hard Drive.
The “149” indicates the total available capacity of the system’s
hard drive in GB. This number will vary based on the size of the
hard drive installed in your duplicator.
Load Partition[004/149]
Load►New Partition
Load Partition[004/149]
Overwrite[Reserved]
Load Partition[004/149]
Load►Auto Generate