![background image](http://html1.mh-extra.com/html/vinpower/daisy-chain/daisy-chain_user-manual_1028392020.webp)
- - 17 - -
Section 2: Selecting the Source Drive for the Hard Drive.
Ignore this section and proceed to Section 3 if you have just completed Section 1:
Loading Master Disc content into the Hard Drive as an image as this process will
automatically switch the source to the hard drive.
Step 1:
Use the up or down arrow button to navigate to the Select Source menu.
Step 2:
Press “ENT”/Enter button to enter the Select Source menu and you shall see a
screen similar to below:
Step 3:
Use the up or down button to locate the Hard Drive and press the “ENT”/Enter
button to select it.
Once the source has been selected, you will be guided to the Main menu. You
should see the following screen:
Section 3: Making Copies from an existing partition/image of the Hard Drive
.
Step 1:
Use the up or down arrow button to navigate to the Copy menu:
Step 2:
Press the “ENT”/Enter button to enter the Copy menu. You should then see the
Choose Partition menu.
DUPLICATOR ( 3)
7.Select Source
HARD DRVIE Port x.x
HITACHI HDS721616PL
DUPLICATOR ( 3)
7.Select Source
DUPLICATOR ( 3)
1. COPY
Choose Partition:
[FUN1] DVD 4012MB
Drive 0 Port x.x
Pioneer DVDRW DVR-
Typically, drive 0 is an indicator representing the 1st drive on the master tower.
The listing of "Pioneer" above is used solely as an example only. The actual writer drives
installed in this system could vary.