- - 30 - -
Appendix A: Installing additional tower(s) to existing Daisy Chain
configurations
The below procedure is not meant as instructions for the initial setup
since all towers in the original order have been pre-configured.
Step 1
Power Off all towers in the existing Daisy Chain System.
Step 2
Connect the new tower(s), which will become the Middle towers, between the First and End
towers. The order of these towers is not important as long as they are placed between the
FIRST and END towers. The cables should be connected as directed in this Quick Setup
Guide or from the label on the back of the tower.
BEFORE:
AFTER: