![background image](http://html1.mh-extra.com/html/vinpower/daisy-chain/daisy-chain_user-manual_1028392028.webp)
- - 25 - -
9. HARD DRVE SETUP
9.1 Select Partition
This function will guide you to choose the default partition/image.
9.2 Load Partition
This function will guide you to load your master disc content into the hard drive as a
partition/image. For more information, please refer to
section 1 of “Make Hard Drive
-to-Disc
Copies”
-
“Loading Master Disc content into the Hard Drive as a partition/image” on page
14.
9.3 Rename Partition
This function will guide you to rename an existing partition/image (including Reserve
partition/image) in the hard drive.
9.4 Delete Partition
This function will guide you to delete or remove an existing partition/image (including
Reserve partition/image) in the hard drive.
9.5 Partition Info
This function will display additional information of all existing partitions/images in the hard
drive. Such information includes partition/image disc type, capacity, etc.
9.6 Select Loading Drive
This function will guide you to select a Reader/Writer drive as the source drive (where your
master disc will be placed into) for partition/image loading/creating related operations.
9.7 Format Hard Drive
This function will guide you to re-format the entire hard drive of the system. During the
formatting process, all of your hard drive contents will be permanently lost. Please use this
function with caution.
10. SETUP
10.1 Language
This setting will allow you to choose which language you prefer be used to navigate
the controller function of this system.
10.2 Auto Start
This setting allows you to choose Auto, Full, or Off. If Auto is selected, this feature
automatically starts the duplication process when all writer drives detect recordable
media inside, or waits for 30 seconds before starting the duplication process if there is
at least one recordable disc in a writer drive and any of the remaining writer drives are
empty. If Full is selected, this feature allows the system to copy automatically once
your master disc and all of the writer trays of the system are filled with recordable
media, but will not start automatically if any writer drives remain empty. If Off is
selected, the copy process requires you to press the “ENT”/Enter button to start the
duplication. This feature applies to applications inside the operation menu such as
COPY, TEST, TEST+COPY, COPY+COMPARE, etc.