5. Disconnect the thermistor with connector from the electronic controller.
6. Remove the thermistor from the mounting clip on the front of the
evaporator.
6) Removing Fans
Figure 2-9
The 2 condenser and evaporator fans are attached to the horizontal fan shroud.
They are the same and all powered up at the same time.
1. Unplug the WINEMATE cooling unit or disconnect power.
2. Remove the WINEMATE cooling unit from the enclosure opening.
3. Remover the outer cover.
4. Remove the top large styrofoam cover.
5. Disconnect the two wires going to the electrical junction block.
6. Remove the four screws holding the fan to the shroud.
7) Removing the
Start Relay
and Overload
Protector
Figure 2-10
- 10 -
Summary of Contents for WINE-MATE WM-3500HZD
Page 2: ...SAFETY INFORMATION 1 ...
Page 8: ...Figure 2 3 Figure 2 4 7 ...
