Vinotemp WINE-MATE WM-3500HZD, Service Manual

Page: 24 / 27

°
F and 55% RH. Products requiring these storage conditions include wine, furs,
pastries, tobacco, chocolates and documents. WINEMATE cooling units are not
intended to cool service cabinets that are maintained at lower temperatures and
are opened frequently.
Table 4-1 Specification under 75
°
F, 55%RH
Model Capacity
Dimensions
(WxHxD")
Electrical Weight (lb)
3500hzd Up to 650 cu ft 3000 bottles 14.25x19.75x21.25 115V 60Hz 6A
75
4500hzd Up to 1000 cu ft 4500 bottles 14.25x19.75x21.25 115V 60Hz 9A
75
6500hzd Up to 1500 cu ft 6500 bottles 17x28x22
115V 60Hz 14A 110
8500hzd Up to 2000 cu ft 8500 bottles 17x28x22
115V 60Hz 16A 110
Before installing the unit in the enclosure, place it on a table and plug it into a
properly grounded outlet. it will run as soon as it is plugged in. Allow it to run for
approximately 15 minutes. There should be a flow of cool air from the front cold
air discharge opening and warm air from the back hot air exhaust opening. See
Figure 4-1 for detail.
If your installation cannot be performed in accordance with these instructions,
contact your dealer. WINEMATE cooling units are not designed to have duct
systems on either the hot air exhaust or cold air discharge. Do not drill any holes
in the cooling unit as severe damage may occur and the warranty will be void.
- 23 -