74
A100K10647
ACM Family - System Installation & Configuration
- Press
0
to delete the recording and cancel the operation
For t o-ste re all i e
grou
t e attri utes are set in arameter
1 (ID) of the 765 feature code.
13.3.4 Simultaneous recall operations
Simultaneous recall operations are handled in the same way as for
regular group calls.
Several recall operations can be active at the same time as long as
there is no overlap in members of the simultaneous groups. If there is
an o erla t e se on re all o eration ill meet a usy signal
ere is a Ma Missing Mem ers setting er grou in Al a ro
i
will let the second group call go through if the overlap is less than the
num er o stations s e ifie
Disable simultaneous group calls in AlphaPro
Select
Exchange & System
>
System
>
Calls and Options
Disable
Simultaneous Group Calls
by unchecking the box
- only one group call can be active at a time
Each group call can be assigned one out of four available
Setup
Priority
levels.
With Simultaneous Group Calls
A group call is canceled by a group call with higher priority if there is
overlap between members.
Without Simultaneous Group Calls
An ongoing group call is canceled by a group call with higher priority.
13.3.5 Hardware and software requirements
Hardware:
The recall function can be used on AMC-IP board
versions 10 (red PCB) and 11 (black PCB).
Software:
Recall is available from AMC-IP software version 11.
License:
Recall requires an Audio Messaging license.
13.4 Auto-Attendant
The Auto-Attendant feature provides voice guided menus for handling
incoming calls.
Play a welcome message on incoming telephone calls
Press a digit to re-route the call
I no igits are resse t e all ill e automati ally re-route
se on s a ter t e message as finis e laying
The Auto-Attendant feature is also available for internal calls and is not
restricted to external calls only.
13.4.1
Configuration
The default directory number for the Auto-Attendant feature is 9550.
Recording the message
Dial
8180 + 9550
from a Super User station.
- Press and hold the
M-key
while recording.
Release the
M-key
to listen to the message
- Press
8
to sa e or
- Press the
M-key
again to make a new recording