Vingtor A-100 Installation & User Manual Download Page 31

Page: 31 / 115

Installation & User Manual

System CTB-100V

With hand microphone ETC-1-TB (CTB-10 & CTB-20)

•

Press the

PTT SWITCH

marked “EMERGENCY PA-BUTTON”

•

Speak clearly into the microphone to give message.

With hand microphone P-66 (CTB-10W_V01 & CTB-

20W_V01)

•

Press the

PTT SWITCH

marked “EMERGENCY PA-BUTTON”

•

Speak clearly into the microphone to give message.

•

Press the

ALL

button once more to end the PA-call.

The LED will be switch off.

From All call station VMT-603

•

Press the

PTT SWITCH

marked “EMERGENCY PA-BUTTON”

Speak clearly into the microphone to give message.
The operation will mute the External Alarm System (General / Fire
Alarm)

•

When the

PTT SWITCH

button is released the CTB-100 system will

be back in normal Talk back mode.

Summary of Contents for A-100




















































































































Search results

Summary of Contents for A-100

Reviews:

Related manuals for A-100

Brands by name

Popular brands

Vingtor A-100, Installation & User Manual

Search results

Summary of Contents for A-100

Reviews:

Related manuals for A-100

Brands by name

Popular brands