Vincent
31
MC 카트리지 세팅
입력 임피던스 1000옴
CONFIGURATION
(환경설정3
)
Adjustments for MC systems
Input impedance: 1000 ohms
Input capcitance: 15 pF
입력 캐패시턴스 15pF
The permanent input resistor cannot be deactivated. The input impedance can be adjusted by using swit-
ches
3
to
6
(adjustment units
(7)
). All matching resistors are connected in parallel, therefore allowing
impedance values between 99 ohms (all resistors used) and 1000 ohms (no additional resistors used).
고정 입력 저항은 없앨 수 없습니다. 입력 임피던스는 스위치 3번 ~ 6번을 사용하여
조정
할 수
있습니다.
참고로 모든 저항은 직렬로 연결되어 있어서 모두 사용하면 99옴, 전혀
사
용하지 않으면 1000옴이 됩니다.
This is how you can find the best settings:
최적의 세팅값을 찾는 방법
First listen to your favorite record using the highest impedance, then the lowest, and finally select a resistor
with a value of about 600 ohms. Now try different adjustments until you get the results you want.
All values can be found in the table below.
가장 즐겨듣는 레코드를 가장 높은 임피던스를 선
택해서 들어보시고 마지막으로 600 옴으로 맞추어 들어 보십시오. 그 다음에
스위치를
조
정을 해가면 들어 보시고 최적의 값을 찾아 보십시오.
Keep in mind to set both channels to the same value!
Table of values (impedance)
DIP
스위치 조합에 따른 임피던스 값
Position „ON“
Impedance
Position „ON“
Impedance
No
사용
하지 않음
1000 Ohm
6
783 Ohm
3
130 Ohm
5
600 Ohm
3+6
126 Ohm
5+6
514 Ohm
3+5
120 Ohm
4
405 Ohm
3+5+6
116 Ohm
4+6
364 Ohm
3+4
109 Ohm
4+5
319 Ohm
3+4+5
102 Ohm
4+5+6
293 Ohm
3+4+5+6
99 Ohm