28 - ENGLISH
• PASSWORD.
Allows the user to configure, change or disable a 3-digit PIN pass-
word to prevent unauthorized access to the thermostat functions,
settings and programs .
Attention!
Remember to make a note of the PIN number in the special
space provided on pg. 16.
•
CALIBRATION.
Used for compensating for any differences between the actual
ambient temperature and the value shown on the display, because
certain installation conditions may alter the thermostat's reading of
the ambient temperature .
7.3 PROGRAMMING.
Used for selecting the program to be executed “
Select Prog.
”, for
editing the user programs “
Modify Program
” and for displaying
and/or changing the temperature set-points used in the various pro-
grammes “
Temp. Levels
” .
- Confirm “
ok
” (button
D
) = scroll menu using “
” (button
B
) and
“
” (button
C
), select setting with “
ok
” (button
D
) .
• SELECT PROG.
Used for selecting an automatic program, choosing between 2
standard fixed programs (
Fixed1
and
Fixed2
) and 2 user pro-
grams which can be freely personalised (
Prog1
and
Prog2
) .
• MODIFY PROGRAM.
Used for modifying the 2 user programs (
Prog1
and
Prog2
), for both
Heating
and
Air condtioning
, to personalise them as desired .
- Select
Heating
or
Air condtioning
.
- Select
Prog1
or
Prog2
.
- Confirm or modify the program name .
-
Modify (the name of the day blinks)
: select day of the week
whose program is to be modified .
- Choose between
Modify Day
,
New
and
Copy Day
:
- Modify Day.
Modifies a program previously stored in memory . Program-
ming begins with time step
"
00:00-00:20
"
and ends with the
set-point for time step
"
23:40-24:00
"
. The duration of each
time step is 20 minutes; the temperature set-points (T1, T2,
T3) entered for each time step must be confirmed by pressing
“
Set
” (button
D
) .
-
NEW.
Creates a new program of temperature set-points for the
chosen day . Programming begins with time step
"
00:00-
