21
EN
13F4, 13A4, 13A4.B - 13F7, 13A7, 13A7.B
Description
Electronic units 13F4, 13A4, 13A4.B (audio) and 13F7, 13A7, 13A7.B (video) can be used only in Due Fili Plus systems.
They are equipped with an alphanumeric keypad and the video version has a camera with a white LED lighting unit.
Electronic units 13F4, 13A4, 13A4.B and 13F7, 13A7, 13A7.B can be used as replacements in systems equipped with electronic units
art. 12F4, 12F7. For entrance panels 89F4, 89F7 the spare part is functional, not mechanical. Electronic units 13F4, 13A4, 13A4.B
and 13F7, 13A7, 13A7.B can also be used in conjunction with traditional push-buttons. Up to two additional button modules can be
connected on single wire, art. 12TS, or one additional button module on 2-wire, art. 12TD: you can connect up to two additional push
button modules on a single row art. 12TS or one additional push button module on a double row art. 12TD to the electronic units 13F4,
13A4, e 13F7, 13A7 and up to two modules 12TS.B to the electronic units 13A4.B,13A7.B.
Technical characteristics
- 1/4” CCD sensor (13F7, 13A7, 13A7.B)
- Minimum illumination 1.0 lux (13F7, 13A7, 13A7.B)
- Power via terminals B1, B2.
- Power via terminals Ext+, Ext- if the electronic unit needs to be powered via an additional power supply.
- Video signal output 16 dBm
- Current draw in standby 120 mA
- Current draw during communication 320 mA
- Current draw during communication and lock activation 470 mA
- Minimum voltage 24 V d.c. measured at terminals B1, B2
- Lens adjustable by hand, vertically and horizontally (13F7, 13A7, 13A7.B)
- Operating temperature: -10 °C
/
+55°C.
Electronic units 13F4, 13A4, 13A4.B and 13F7, 13A7, 13A7.B are suitable for both VERTICAL BUS and HORIZONTAL BUS instal-
lation. The default configuration is VERTICAL INSTALLATION and features management of up to 200 users. The HORIZONTAL
INSTALLATION configuration features electronic units that fully manage up to 1000 users each.
NOTE: The values indicated in square brackets refer to the “HORIZONTAL INSTALLATION” configuration.
1
2
3
4
5
6
7
8
9
0
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
+
R
3
2
1
Electronic unit
Wiring for
connection of
additional button
modules
PRG button
RESET
Wiring
for connection
terminal block
Figure 1
Figure 2
Manual adjustment
horizontal and vertical
