20
69AM/T
EN
4.4 - Conversation time
Press the button to go to the next item in which the user can
modify the time for which the conversation with switch lasts on the
(video)entryphone. The current value is shown on the display:
On entry of digits, the time can be modified in intervals of ten
seconds:
To cancel, press
. To confirm, press
. Acceptance of the
command, as in all cases, is shown on the first line of the display:
If the time is outside the admissible interval, i.e. over 2550 sec-
onds, the first line of the display shows the error:
Use the button to move to the previous item in the program-
ming menu.
4.5 - Self-start time
Press the button to go to the next item in which the user can
modify the time for which the self-start function requested from the
entryphone or video entryphone lasts on the switch. The current
value is shown on the display:
On entry of digits, the time can be modified in intervals of one
second:
To cancel, press
. To confirm, press
. Acceptance of the
command, as in all cases, is shown on the first line of the display:
If the time is outside the admissible interval, i.e. over 255 seconds,
the first line of the display shows the error:
Use the button to move to the previous item in the program-
ming menu
4.6 - Function 1 time
Press the button to go to the next item in which the user can
modify the time for which output F1 is activated.
The current value is shown on the display:
On entry of digits, the time can be modified in intervals of one
second:
To cancel, press
. To confirm, press
. Acceptance of the
command, as in all cases, is shown on the first line of the display:
If the time is outside the admissible interval, i.e. over 255 seconds,
the first line of the display shows the error:
Value 0 has the special function of activating output F1 for 0.5
seconds:
Use the button to move to the previous item in the program-
ming menu.
4.7 - Function 2 time
Press the button to go to the next item in which the user can
modify the time for which output F2 is activated.
The current value is shown on the display:
On entry of digits, the time can be modified in intervals of one
second:
To cancel, press
. To confirm, press
. Acceptance of the
command, as in all cases, is shown on the first line of the display:
If the time is outside the admissible interval, i.e. over 255 seconds,
the first line of the display shows the error:
Value 0 has the special function of activating output F2 for 0.5
seconds:
Use the button to move to the previous item in the program-
ming menu
4.7A - Presence sending
The switch sends the bus information about its presence so that
the IU in charge of managing the self-start are constantly apprised.
In some situations it is desirable for this to be done periodically.
Using buttons
to
enter the send time in minutes.
to
disable. Press to confirm the change.
Default = 1 minute, 1’ minimum, 90’ maximum
4.7B - Enabling
You can configure on the switch as entrance panel ID by enabling
or disabling the controls sent from the indoor units relating to func-
tions F1 and F2. Letter
D
is used to indicate the disabled status of
D
irect control signals transmitted to the electronic unit. Letter
C
is
Summary of Contents for 8013406205636
Page 30: ... 30 69AM T ...
Page 31: ... 31 69AM T ...
Page 32: ...Viale Vicenza 14 36063 Marostica VI Italy www vimar com 49401592A0 00 2007 ...
