18
69AM/T
EN
The
button has no function because the programmer is
powered via the bus. For the same reason the auto-shutdown
function is not available. The programmer
and buttons
enable selection of the following item from the main menu:
During the wait for an answer from the switch, the display shows:
After a few seconds, the programmer display shows the type and
version of the software related to the switch:
Immediately after, the first item of the programming menu is dis-
played. The programming procedure terminates either when the
timeout elapses or when the
button is pressed while the user
is in any of the external menus listed below.
4.1 - Message language
Programming can be in Italian (default local language) or English.
Other languages are available for the respective markets. To
change language, press
for Italian or for English.
To cancel, press
. To confirm, press
. Acceptance of the
command, as in all cases, is shown on the first line of the display:
The display now changes to:
Use the button to move to the previous item in the program-
ming menu.
4.2 - Switch ID as entrance panel
Press the button to move on to the next item, which can be
used to change the ID of the switch. To change the ID, type in the
digits in order to compose 0 or a number between 2 and 15 in the
case of a Vertical installation and between 2 and 8248 in the case
of a Horizontal installation.
To cancel, press
. To confirm, press
. Acceptance of the
command, after checking that there are no other objects in the
system at that time with the same address, is indicated in the first
line of the display:
If the ID is outside the admissible range, the first line of the display
shows the error:
Use the button to move to the previous item in the program-
ming menu.
4.3 - Switch ID as device
N.B.: this does not appear if the installation is Horizontal.
Press the button to move on to the next item, which can be used
to change the ID of the switch, seen either as an entryphone or a
video entryphone. The ID is not assigned by default:
To change the ID; type in the digits in order to compose a
number between 1 and 200 and which is not equal to the ID of an
entryphone or video entryphone:
To cancel, press
. To confirm, press . Acceptance of the
command, after checking that there are no other objects in the
system at that time with the same address, is indicated in the first
line of the display:
If the ID is outside the admissible range, the first line of the display
shows the error:
Use the button to move to the previous item in the program-
ming menu.
4.3A - Switchboard CCTV
Press the button to move on to the next item, which can be
used to change the enabling for use as a camera of a switchboard
40510.
The current value is shown on the display:
0 means not enabled.
For vertical installations, numbers 1 to 4 only are valid.
For horizontal installations from 129 to 144.
To cancel, press
. To confirm, press
.
Acceptance of the command, as in all cases, is shown on the first
line of the display:
If the ID is outside the admissible range, the first line of the display
shows the
error:
Summary of Contents for 8013406205636
Page 30: ... 30 69AM T ...
Page 31: ... 31 69AM T ...
Page 32: ...Viale Vicenza 14 36063 Marostica VI Italy www vimar com 49401592A0 00 2007 ...
