12/44
NT-50907601-KUBAIR-F400-ECOWATT-AN-191025
3.4 Handling
To keep people safe or prevent damage to property,
use compliant handling equipment that is in a good
condition.
The casing must be lifted at the 4 lifting lugs.
Use slings with a length that is at least double the
height of the casing. Make sure that the slings do
not rub against the motor cowl or the electrical
accessories.
If in doubt, detach it to avoid any damage.
3.5 Casing assembly
The support surface that will support the base of the casing must be as flat as possible (sealing frame or
upstand supplied on demand). A seal of foam or similar material (not supplied) is recommended between
the support surface and the base of the casing. A maximum incline of 2.5° is tolerated between the motor
axis and the vertical axis (see diagram below).
Let available space for maintenance operations (§ "6. MAINTENANCE", page 41).
2,5°
Make sure that the support is adapted to the weight
of the whole machine and its various accessories.
Attach the casing at the Ø20 holes provided for
this purpose. You are advised to use a LL washer.
Any screws that are not properly tightened may
make noises and cause harmful vibrations. Once
the machine has been correctly set up, make sure
that the motor turbine is able to rotate freely without
any friction or noise. Vibration isolating devices are
available: KUBZ 05.
Detaching and re-assembling casing panels
The smooth side panels are easy to detach by
loosening their screws. They are repositioned in the
same way.
