Villager VLN 250, Original Operating Manual

Page: 24 / 70

Villager VLN 250 (GB)
11
Only use original replacement parts which are provided by the manufacturer.
Danger of accident!
Parts which were not reviewed and approved by the manufacturer can damage
the machine and can lead to serious injuries. Only use original parts as
replacement parts, especially with safety mechanisms and cutting tools.
TROUBLESHOOTING
ENVIRONMENTAL PROTECTION AND DISPOSAL
CAUTION!
This product has been marked with a symbol relating to removing
electric and electronic waste. This means that this product shall not be discarded
with household waste but that it shall be returned to a collection system which
conforms to the European WEEE Directive. Contact your local authorities or stocks
for advice on recycling. Then it will be recycled or dismantled in order to reduce the
impact on the environment. Electric and electronic equipment can be hazardous for
the environment and for human health since they contain hazardous substances.
Problem Possible cause Solution
Motor does not
run.
No electricity comes to the
machine Check the power supplier and the power
line.
The motor is overloaded or
overheated. Allow the machine to run idle for about 2
minutes so that it can cool down.
Vibrations are
too strong.
Screws or parts of the machine
are loose.
Tighten all screws.
The impact drill is not correctly
mounted. Mount the impact drill correctly (see
Before operation).
The work piece is not properly
supported. Secure the workpiece (for example on a
workbench).