Villager
VGS 380 PRIME (GB)
8
(6)
Follow the manufacturer’s sharpening and maintenance
instructtions for the saw chain.
(7)
Only use replacement bars and chains specified by the
manufacturer of the equivalent.
2. Explanation of Symbols on the Machine
The port to refuel ”MIX GASOLNE”
Position:
Fuel cap.
The port to top up chain oil
Position:
Oil cap.
Setting the switch to the “O” position, the engine stops immediately.
Position:
Rear-left of the unit.
Starting the engine. If you pull out the choke knob (at the back-right of
the rear handle) to the point of the arrow, you can set the starting mode
as follows:
First-stage position-starting mode when the engine is warm.
Second-stage position-starting mode when the engine is cold.
Position:
Upper-right of the air cleaner cover.
The screw under the “H” stamp is The High-speed adjustment screw.
The screw under the “L” stamp is The Slow-speed adjustment screw.
The screw at the left of the “T” stamp is the ldle adjustment screw.
Position:
Left side of the rear handle.
For safe operation and maintenance, symbols are carved in relief on the
machine. According to these indications, please be careful not to make any
mistake.
Summary of Contents for VGS 380 PRIME
